How to Reset Canon Pixma iP4000 Printer

If your Canon Pixma iP4000 printer users, please read this post, hopefully can help

Here's how to reset Canon Pixma iP4000 Printer

1. Position the printer off, press and hold the "Resume / Cancel", then press and hold the "Power / Power". Keys should not be removed once served until LED light turns green.
2. While still holding down "Power / Power", release the button Resume / Cancel ".
3. Then, the position of the Power button still held / pressed, press the "Resume / Cancel" 2 times, then release both buttons.
4. When the LED light turns green, press the "Resume / Cancel" button 4 times.
5. Then press the button "Power". LED light will glow green, and wait a printer will reset.
6. When finished, the printer back to the menu selection mode automatically
7. Finally press the "Power / Power" to exit service mode.

Good luck ..............

How to Reset Waste Ink Counter On Epson RX500

The following post is about how to reset waste ink counter on Epson RX500. If you need it, please just read and hopefully help ........

Here are the steps to Wast Ink Counter Reset On Epson RX500

1. Press and hold all of the following keys: Power / Power, Load / Eject, Stop, B & W, Color.
2. Release all buttons.
3. Once the printer is on, you'll see "Init eeprom" on printer screen.
4. Press the Color button to clear the counter / reset.
5. Completed

Good luck .......

How to Fix the Printer Canon iP 2770 Orange Led Blinking 13 Times

Discussion this time on the blink 13 times Orange on Canon iP2770 Led indicator. This incident may be quite confusing for those who have never experienced it. OK just ...

Indications:
When the printer is turned on seems OK, but after the printer is commanded to print, Led indicator light flashes 13 times Orange Canon iP2770 on this. Here's a picture that appears on the screen:

How To Reset Printer Canon MP258

This post I will discuss on How to Reset Canon MP 258 printer which I've always prove successful. Because a lot of Friends who seek this MP258 resetter software. So let's just ..........

 

How to Solve Problems Catridge Not Detected and Slow Back To place on Epson TX111 Printer

If you are a user This TX111 Multifunction Printer Epson Catridge problems are not detected and Catridge slowly back into place, do not be confused. Please try the tips in this post I have time, maybe can help .......

How to Reset MP145 Printer Error 27 (E27)

There was someone who sent the message via email to me and asking how to reset error 27 (E27) on the Canon MP145 printer, his intention I will reply to e-mail but when I reply, e-mail reply from I was not sent and an error occurs like this "Delivery to the Following recipient failed permanently." Maybe you were wrong to enter your e-mail. Okay, for you who had sent messages via e-mail because I could not reply, I'll post here just hopefully you can have time to read it and try practiced on your Canon MP145 Printer.